Page History

These instructions will help you connect your Android device to the secure drew1x network. Once you've gone through this process one time, your settings will be saved and you won't need to do it again.

1. Install the Drew Public Certificate
   1. On your Android device, download the certificate here: Drew_Public.cer
   2. Once downloaded, your device should launch a window to name the certificate:
      1. Certificate name: Enter whatever name you like
      2. Credential use: select Wi-Fi from the drop down menu
2. Configure the drew1x connection on your Android device
   
   1. Navigate to the settings screen where you select your wireless network
   2. If you have not tried to connect to drew1x before, simply select "drew1x" from the list, and the configuration page will come up. If you have previously connected, long-press on the drew1x network to bring up the menu, then select "modify network"
   3. Use the following parameters:
      1. EAP Method: select PEAP
      2. Phase 2 Authentication: select MSCHAPV2None
      3. CA Certificate: Select the certificate that you downloaded and named in step 1
      4. Domain: leave this blank
      5. (unspecified)
      6. Identity: enter ad-drew\username where "username" is your Drew username
      7. Anonymous Identity: leave this blank
      8. Password: Your Drew uLogin password
      9. Select "Save" to save your settings.
3. Connect to the drew1x network by selecting the drew1x network and choosing "Connect"